WitrynaThe Axalta logo, Axalta™ , Axalta Coating Systems™ and all products denoted with ™ or ® are trademarks or registered trademarks of Axalta Coating Systems, LLC ... http://imronmarine.com/wp-content/uploads/2024/03/EN-DP8140.pdf

Rail Coatings - Topcoats - :: Welcome to SARIS Coating

WitrynaIndustrial Paint Store - Imron 3.5 HG-C - Axalta Industrial Home > Industrial Coatings > Urethanes > Imron 3.5 HG-C High Gloss Polyurethane Clear One Gallon Kit Product Code: 611P-KT1 Features Share your knowledge of this … WitrynaTECHNICAL DATA SHEET P60 01.11.2014 IMRON® FLEET LINE ADHESION PROMOTOR 4/5 l EN P60-1 This Technical Data Sheet supersedes all previous issues REMARKS - P60 is tintable with the Imron® Fleet Line PowerTints® up to maximum 5 %. - Do not use activated P60 beyond the pot life nor reduce it further to get viscosity … party games for 10 year old boys

Imron Elite Productive Basecoat 3.5 VOC (EY quality) - Axalta

WitrynaImron Elite Basecoat (EB) may be clearcoated wet-on-wet with 8840S™3.5 VOC, 8821S™ 2.1 VOC or EZ-3460S™ 3.5 VOC Easy Clean clearcoat. Open time of basecoat prior to clearcoat is between wet-on-wet to 16 hours. When clear coating Imron Elite Basecoat, or recoating with itself, sanding is required if the Witryna• Imron Elite Basecoat (EY) may be clearcoated wet-on-wet with 8890S™3.5 VOC, 8821S™ 2.1 VOC or EZ-3460S™ 3.5 VOC Easy Clean clearcoat. • Open time of basecoat prior to clearcoat is between wet-on-wet to 16 hours. • When clear coating Imron Elite Basecoat, or recoating with itself, sanding is required if the WitrynaTECHNICAL DATA SHEET Products Imron® Fleet Line Elite Heavy Duty Coating Product mix Mixing ratios with special agents are available in the productmix table on Chromaweb and in the specific TDS. DIN 4: 20 - 25 s at 20°C 40 - 80 µm Imron® Fleet Line Elite Heavy Duty Coating can be recoated within 8 hours, with scuff sanding tincher elementary school long beach ca